We offer cable trays in Two-side rail system in a variety of materials and finishes. The cable trays are fabricated in mild steel and also can be provided in pre-galvanized steel, hot dip galvanized and painted with grey color enamel or powder coated as per the requirement.
The standard length of a single piece of cable tray is 2500 mm. Flanges of the tray can be manufactured according to requirement.
The cable trays can be ordered as per the project specifications accordingly we can provide our offer.We also manufacture accessories such as clamps, connecting pieces, slotted angles for support and installation of cables over the cable trays.
Types of Cable TrayPerforated Type
Ladder type / Ducts
Cable Ducts/Angle Ladder
Solid Bottom Tray
Perforated Cable TrayLight duty
Medium duty
Heavy duty
Ladder Cable TraysThe Ladder Type Cable Trays are manufactured as per following specification:
Width: From 150 mm to 1500 mm
Height: From 50 mm from 150 mm
Thickness: From 10 SWG to 16 SWG
Bending: From 10 mm to 25 mm
Radius Width: From 30 mm to 50 mm
Radius Height: From 0 mm to 25 mm
Steel: As per IS: 1079/513
Galvanising: As per IS: 2629/4759
Legends- Straight Ladder
- Horizontal Elbow
- Horizontal Tee
- Horizontal Cross
- Horizontal Reducer
- Vertical Elbow Up / Inside
- Vertical Elbow Down / Outside
- Coupler Plate
Raceway/Ducting/TrunkingWe manufacture Raceway/Ducting/Trunking to the project the specifications:
Length: From 2500 mm to 3000 mm
Width: From 50 mm to 300 mm
Depth: From 50 mm to 150 mm
Thickness: From 1.6 mm to 3 mm
Finish: Painted / Epoxy Coated / Powder Coated
Material: Mild Steel
Steel: As per IS: 1079/513
AccessoriesT Clamp, Coupler Plate, Joint Fitting, Cross Strap, Side Angle Joint Fitting, Spring Nut, L Clamp, Gusset Fitting, Shoulder Fitting, Angular Plate, Floor Plate RD, Floor Plate LD, Lattice Plate.